logo 600 3D Weight

[bruno95]

Hi lucky mikado 600 3D pilots,

I would like to know the weight of the logo 600 3D kit without electronics, engine, blades.
If not possible, please post your configuration weight (without battery) and indicate blade, servos, engine,esc, gyro

Target is to compare with Trex 600 and E620 all up weight with same configuration.
I'm looking for 600 size electric heli, with best power / weight ratio

Thanks a lot in advance.

Bruno.

[t-rexn8]

I think just about everyone knows that the logo 600 is going to be lighter than both of those birds. From what I hear it is right under 7 lbs.

[EricW]

From the Ircha video's on the net you can clearly see the impressive power to weight ratio the Logo's have, both the 500 and 600.
So it must be lighter i guess :confused:,
otherwise it's Daniel's "alien" collective management or they have access to new motor and battery technologie IMO.
After looking at the manual I believe it's a very good, light and complete design.
You can fly it as a beginner/sport flyer and by adding some volts (and optional another head and Vstabi Unit $$ ! ) it turns into a 3D rocketship.
Makes me :drool:

Still I also would be very interested in seeing the differences in weight without electronics.

[Daniel Jetschin]

Hey,

My scale says 7.59lbs ready to fly with 4350 10s! We have'nt done any to the motors and stuff just increasing the watts by going from 8.7 (logo 14) ratio to 8.15 (now) :thumbup:

We should be around 3500 watts or close to 4000 :noteworthy

[DebianDog]

Dan.... the Man! That is light :shock:

Hurry up and get Finless a 3D so we can all build one.:p He already has batteries :thumbup:

[Daniel Jetschin]

Hey Dan

Already awaiting reply from Mikado bout that :thumbup:

[DebianDog]

:hug: I am gonna double your stickers! :hug:

[bruno95]

Hi Daniel,

Thanks a lot for your fast reply. Now i'm convince. One more question tehn : Which engine do you use to get such power ?

Bruno.

[LITHIUMSTATIC]

I'm not waiting on Finless to make videos!!!!!...... not that they aren't nice and helpful.;)

[Daniel Jetschin]

Hi,

You can use either the 24-4 or the 32-3 on 18-19t pinion:happyd

[bruno95]

Thanks Daniel,

I'll check those motors.

Regards

Bruno

[EricW]

Impressive, thanks for the info..
That's 350-500 gr. (0.77-1.1 lbs) lighter than a T-rex / Raptor if i'm correct.
Now decide if i'm going to save money for the 500 or the 600...
I'll have one early next year if it doesn't get beaten, which I doubt :)