Raptor compatible parts

[Franz1983]

Hey Guys!

I would like to ask about it: http://www.gohbee.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=10210&Category_Code=1100

Do it will adjust for Raptor 30 v2 ?

[flyinfool]

Yes it will work.

[Franz1983]

Thank you Jeff:)

I have one more question.
Do your store sends packages to Poland ? :)

[Gohbee]

Just a note....Yes and no.... Our washout (10210) is a little bit different. You should be able to use the arms but the mixing base will require modification for it to work. The pins used on our phasing ring have a wider center distance than on the Raptor. Therefore you can assemble the Gohbee washout arms to the Raptor mixing base as one solution. Otherwise you'll need to dremel or machine the slots closer together for the Raptor phasing pins to slide freely.

This has been my expenience. Jeff....has your experience been different? Hope this helps.

-David

[flyinfool]

I have used the older plastic base on a Raptor and I guess I assumed that the metal one was the same since they fit in the same place.

If David says that you may have to enlarge the slots a little, then I would believe that.
Thanks for correcting me.