ferincr
08-29-2007, 04:36 PM
Hi, I have a RL20 on my R90. I set it up so I get around 1450 on normal and around 1850 on IDL1. It was working ok at the high setup but in normal it was hunting a lot (it's on a S9252 servo) I managed to stop the hunting by lowering the sensitivity on it (the little screw on top of it) but I had to turn that screw all the way counter clock wise to do it, would this also affect the performance on idl1? I haven't had the chance to fly it much after it buy I thought I noticed that it bogged down at top speed now. Is this possible or just my imagination?
I also tried (before messing about with the RL20) to tune up the engine at mid range (OS .91SZH non pumped) but I got it all the way closed and it was no change on the hunting.
Would it be better to let it hunt? I have another one on my R60 and I have no problems with it.
Thanks for any advice,
I also tried (before messing about with the RL20) to tune up the engine at mid range (OS .91SZH non pumped) but I got it all the way closed and it was no change on the hunting.
Would it be better to let it hunt? I have another one on my R60 and I have no problems with it.
Thanks for any advice,