HyperFormance Goodies

[syn-]

Has anyone had a chance to give the new blade girps or washout levers from HyperFormance RC a try? See the links below.

Washout Levers (http://store02.prostores.com/servlet/hyperformancerc/Detail?no=5)
Blade Grips (http://store02.prostores.com/servlet/hyperformancerc/Detail?no=6)


-syn

[Airboss]

i have only replaced my stock hub with the hyperhub for ease of assembly , all the other parts in the kit look to be high quality and its not necessary..

[Mike Fortin]

Right now I am currently flying the full compliment of Hyper upgrades (except the Hyper Drive) and I can tell you that the performance of the helicopters has definetly improved.

Cyclic is crisper and more responsive for sure.

Also, the Hyper upgrades make working onthe N9's a breeze!

If you haven't tried them, get them!

:thumbup:

[syn-]

Good to hear. I've got the HuyperHub and HyperCollar, which have both impressed me, so I can't wait to get my hands on these other upgrades/replacements to give them a try. May have to wait a bit though! :)

-syn

[giopapy]

Hi all
I live in Italy and I bought an identical HUB from a guy here, it cost less than the half of the hyper hub
and it's the same !!!
this guy have a CNC machine and he did a lot of parts for my SYNERGY.
It works great and lets you save a lot of time when you put the engine on.
Awesome.

[Mike Fortin]

it cost less than the half of the hyper hub
and it's the same !!!

By looks alone it looks pretty heavy. Plus, HPRC also just released the new Hyper Hub Xtreme.

Imitated...not duplicated!;)

[Mike Fortin]

it cost less than the half of the hyper hub
and it's the same !!!

By looks alone it looks pretty heavy. Plus, HPRC also just released the new Hyper Hub Xtreme.

Imitated...not duplicated!;)

[Gscott]

Hyperformance has done alot with the Synergy and their stuff is top notch. I for one will continue to support them even if their stuff is a little more.

[giopapy]

I know HPF is top notch but their prices are very expensive.
That's why I asked my friend to produce those parts for me.
They works great and are really cheaper compared to the HPF ones.
I just tried to save some money,

[Mike Fortin]

I flew my Hyperdrive this weekend and was very impressed.

It definetly made the heli a bit smoother and was sure as heck easier to install.

If anyone needs stock TT's, couplers and bearings let me know!!!

[Airboss]

hello everyone,, i have the hypersizer ballink tool, i resized all the links and they are still too tight. is ther a trick to getting these links to fit properly??

[gtrick90]

I have all the Hyperformance stuff.

Dont try to save money with everything else.

I've the HyperSizer tool too, and with 3 turns each ball-end, now all is smooth like sylk!!!!!!!

Luca

[Awamori]

I ran into the same problem with the hypersizer. No matter how many times I turned and twisted they were still way too tight. My kit came with the silver ball links and I ended up using the sizer and plier squeeze method to get them where I like them. Total pain and "very" time consuming for sure.

[Airboss]

silver balls, squeaze and turn works excellent.this heli flies awsome.

[DavidR]

I have the washout levers, much better than having to fool with the little c-clips in the kit.

[frankg11]

I have the hyper hub and hyper collars on both my synergy's.

I also have they hyper levers and hyper tubes. I understand that the levers are very good and help remove play. And I know that tubes will reduce vibration, have seen it.

They are going on both ships this winter when I have a bit of free time.

[Airboss]

my N9 only uses the hyper hub and has no vibes and flies beautiful, right out of the box this is a sweeeet heli!