PDA

View Full Version : Trex 600 CF Completely RTF


trackhead
08-31-2007, 10:08 PM
Trex 600 CF Completely Ready To Fly and ready for AP with custom front mount. The front mount is isolated from the main frames by 4 Barry mounts. It shoots completely vibration free HDV footage with my Pany SD1 with .7x wide converter. The radio and AP2000i is all set up and ready to go. This is a turnkey AP rig that will work great for stills or video. It was purchased in May 2007 and flown about 80 times. The three lipos are in excellent condition, always charged on a balancer.

Stock Trex 600 with 9451 servos/9254 tail/401 gyro-Retail $1100
NHP 600 blades-Retail $70
Stock ESC and additional Castle Creations 80 ESC-Retail $110 for CC
Three Lipos (FP 4900 and FP 5000) (approx 30 cycles on each)-Retail $900 Two Align 7.4v 1100mah receiver batteries-Retail $30
AP2000i set up and working perfectly-Retail $300
JR 9 channel receiver-Retail $100
JR 9303 Radio-Retail $400
Astro 109 Lipo charger-Retail $110
Flight Power V Balancer-Retail $45

Total invested in heli approx $3,200.

Custom front mount (Askman Gimbal) Pan 220 degrees, Tilt 150 Retail $100
Berg 6 channel receiver Retail $30
Futaba 6 channel radio Retail $80
2.5" Ikan monitor Retail $100
2-Blackwidow 500mw downlink transmitter Retail $80
Rangevideo receiver Retail $90

Total invested in AP set up $480

http://fritzrips.com/Gallery1/albums/Heli/IMG_5855.jpg

http://fritzrips.com/Gallery1/albums/Heli/IMGA0278.jpg

http://fritzrips.com/Gallery1/albums/Heli/IMG_5856.jpg

http://fritzrips.com/Gallery1/albums/Heli/IMGA0281.jpg

Asking $2500 I would consider selling without radio/receiver.

50mb QT vid of when it was first built.
http://www.fritzrips.com/FritzripsRandomVids/Trex.MOV

WMV Vid of mount.
www.pitonproductions.com/RandomVids/Servo.wmv

Some random footage-QT
www.pitonproductions.com/RandomVids/ParkClips.MOV

HoverOver
09-01-2007, 06:49 PM
Please check your post at RunRyder

HoverOver
09-02-2007, 01:07 AM
I've seen this same setup for sale in about 4 places - including ebay. What is the price you are asking?
Thanks, Mike