Could someone please tell me why i cant +11 degrees PITCH

[stevef12005]

Hi everyone, ok my problem is this after having over a week of mucking up my radio & resetting my only channel on my Futaba 6EXH that was setup for my DragonusII i now have a problem i cant +9 or +11 degress.
would i have mucked any things up when i centred up the servo & made sure that when i was at 50% or half stick that the servo arms were all at 90 Degrees.
i seem to have all top & bottom throw also there seem to be the same amount of room at the top & bottom of the shaft

and the other reason i'm P!$$ed 00f just hand an email back from my local club telling me that they are only fixed wing so i can only count on you guys for all the help?

many thanks steve

[Claude626]

What's the max pitch you can get? If you can't get max pitch you want at full stick, then you might want to play with the pitch linkage.

[chris52]

Hi
I am fairly new to helicopters but have been into radio control for quite a few years. although i'm no expert on helicopters the principles are the same.

There are a few more details we could do with in order help.

1. Are your end points set correctly allowing full throw of the servo?
2. Have you changed the servo horn if so have you set it at the same distance from centre as the old one?
3. Your pitch curve in normal mode, is the positision high (point five in a 5 point curve) set at 100%?
4. Is everything nice and free without any binding or sticking in the movement of the linkages.

Hope some of this helps
chris