i need help with a glitch issue

[whattheheli]

i have a mx400 with the ccpm kit hs-65hb's on the swash an hs-81 on the tail and a logictech 2100t gyro that i am haveing glitch issues with it only glitches when i am actualy flying it done not glitch when i hold the heli and spin it up i can not seem to narrow this down i have a changed out the pheonix25 for the original helimax esc still no change i have moved the electronics and i am using a ferrite ring the head is 100% new new tail boom and belt new main rotor's brand new servo's can someone help ? :arggg::arggg::arggg::bawl:mad:

[Scottlclem]

This may be of little or no help since you changed speed ctrls.
The CC25 bec can't handle 4 servos. I had one and was able to take it back to the hobby shop I bought it at. If I remember correctly it's bec is rated for only 3 servos it even says it in the cc25 instructions.It will work with 4 servos in perfect conditions but with all 4 servos under a heavy load it will cause the bec in speed ctrl to overheat and shut down for a split second, it seems like really bad glitch when it does it. I was getting 3 or 4 per flight.A servo binding can cause it to do this too.

[Dwntyme]

Hummmm. what is the wireloom around your wiring made of ?

[Scottlclem]

Try rewiring the ferrite ring with only the bec lead from your speed ctrl. No servo wires.

[apeman88]

What is the condition of the reciever? I had simular problem on a few years back and it was the reciever... too old and too many crashes on it :-(

[whattheheli]

well i found that my receiver is the issue . so my local hobby shop told me he would go with the berg 7 so i ordered it and hope it comes in friday ! :thumbup: