620s on a Raptor 50 SE?

[islandheliguy]

Anyone done this? If so, were any mods required to make them fit?

[blakka_1]

620 blades are too long for a R50SE, the main blades will end up chopping the tail blades off :WOW . If you want to run 620 blades then you will need a longer boom and a longer belt. :)

[islandheliguy]

Hrm... wonder if anyone makes a wide chord 600mm blade

[WillJames]

How about 600 V-Blades? TONS of lift!!

[blakka_1]

Yeah like Will said the V-Blades have lots of lift, they have a nice wide chord on them. On the subject of chords, does anybody know how wide the chord is on the Thunder Tiger 600mm blades? :dontknow .

I just measured the chord sizes on all the 600mm blades I have. My findings are as follows :-

- Sab 600's = 56mm chord
- NHP 600's = 52mm chord
- MS 600's = 54mm chord

:)

[Daniel Jetschin]

Hi

My TT 600's are about 55mm wide

[blakka_1]

Thanks :D .

[ausheli]

Some guys over here are experimenting with 610's

[WillJames]

The Chord on my 600mm V's is 57mm

[blakka_1]

Thanks Will :thumbup: . I'm looking for a new set of blades, I want to get a blade that has the widest chord. It seems that the V-Blade has the widest chord for 600mm blades, second inline is Sab. I'm also considering the TT blades because although the chord is only 55mm wide there blades are 606mm long which is great because i'm looking for a blade that will give me good auto hang time. I dont think I will get the V-Blades :( they cost to much over here in the UK :arggg: , £89.99 for a pair, I can get the Sab's for £49.99 :) . I can't get TT blades over here so it looks like I might have to go with the Sab's.

If anyone knows where I can get TT blades from, within the UK, please let me know.

Thanks. :)

[Hitch-Hiker]

why are your not happy using 600's?