pblgml
02-20-2005, 09:40 PM
I need help in setting up my 10X for a fut gy502 can anyone help me with ideas on how this is to be done.
WayneBrown
02-21-2005, 07:03 PM
I think you can find some tips at http://www.raptortechnique.com/gyrohowto.htm
not specific to the 10x, but you should find enough to cross over from other JR radios.
Jeff Palmer
03-30-2005, 09:34 AM
If you still need help, drop me a PM and i will answer anything you need to know.
I had to set the gyro gain to max in the gyro setup, otherwise the gains woudl only go to about 30% using the code 44 menu. The trouble is that Futaba's gyro adjustment on the 9 channel, as compared to code 44, gives the full adjustment value to that channel, in JR terms 150%. Also the futaba goes from a negative value to a positive value, and JR is from 0-100%, thus anything under 50% is normal and above is HH. The 10x code 44 adjustment only allows for 100% travel, which tells the gyro only 2/3 of what you are expecting it to, because it leaves off the last 50% in either direction. I have not found a way around this with out just plugging into Channel 5 and using the gear switch and the travel adjust menu. But if you do that, you are throwing out all the nifty automatic gain switching features. I have found that once you max out the in-gyro gain, there is plenty of gain to go around even if you can't adjust it all the way up. It is really confusing, and even harer to explain. :arggg: