help big prob Dx7

[aevans692]

hi guys

this has been driving me crazy...

Ok I bought the dx7 pluged it to my sim (phoenix wit all the updates) worked fine, every thing as it should be..

ok thismorning turned on the sim,she worked fine but then I relised I was in my raptor 1 mode and not the sim, So I then switch to my sim (all in the memory of the TX) and now nothing works at all

I have checked everything, when I start up the sim it is telling mre to turn on my TX , its as if it is not there, I have checked all the most obvious things, now I am stuck ..

any thoughts would be great.

[aevans692]

after checking every thing I think it might be the dsc pplug in the TX , any one know of any known issues..

[Pinecone]

a) did you turn your Tx back off? Did you turn it on to switch models with it connected? Not sure if this would do anything.

b) try disconnecting the USB adapter rebooting coompuer then reconnecting.

All else fails, email Phoenix.

[vetterick]

I keep my dongle plugged in all the time (nothing wrong with that statement get your mind out of the gutter), every now and then it locks with both sticks up and to the left, it just needs to be unplugged and plugged back in to reset.

Rick

[BarnOwl]

Your program might have gone corrupt. Did you try a re-install?

[aevans692]

Thanks guys , I have tryed everything..Think it is the dcs plug will take it back to the shop to test it out...

[aevans692]

prob fixed

, was the cable I emailed phoenix sim and they told me to send them the cable , within four days I was up and running again with a new cable..

that is customer service...