AZ ChopperCam
09-09-2007, 03:09 PM
This is one of my super stretched E-Raptors that I used for aerial photography and video.
Here are the specs:
Stretched Raptor 50 V2 (can take up to 720mm blades)
TP Packs electric conversion
modified Logo 24 canopy (very light)
ZPower Z50A-600 motor
Mavrikk metal grips & seesaw
JR metal tail slider
dual carbon battery mount plates
JR DS811 servos on aileron/elevator
JR DS8311 on collective
9252 on tail
GY401 gyro
Logo 24 tail boom supports
metal swashplate
metal elevator A-Arms
hardened stainless main shaft
carbon tail fins
Raptor 90 tail blades
Pics show an AP2000i flight stabilizer, Castle 85HV ESC, and BEC but those are not included. I can include them for an additional amount. email me for more info.
This is capable of hauling up to 6lb of payload. I used to have a custom front camera mount on it as well as a 360° underslung mount. On 10s5000 FlightPower packs it would get around 8 minutes of time fully loaded at 14lb. If lightly loaded at less than 12lb you can expect 10 minutes.
The motor is perfect for this heli. In 100°+ ambient temp days I would rarely see the motor get above 155°.
I have flown this bird for about 50-60 flights on aerial photo/video missions. It has always done well and has been well maintained.
$685 shipped
http://azchoppercam.com/forsale/raptorap/1.jpg
http://azchoppercam.com/forsale/raptorap/2.jpg
http://azchoppercam.com/forsale/raptorap/3.jpg
http://azchoppercam.com/forsale/raptorap/4.jpg
http://azchoppercam.com/forsale/raptorap/5.jpg
http://azchoppercam.com/forsale/raptorap/6.jpg
http://azchoppercam.com/forsale/raptorap/7.jpg
http://azchoppercam.com/forsale/raptorap/8.jpg
http://azchoppercam.com/forsale/raptorap/9.jpg
Here are the specs:
Stretched Raptor 50 V2 (can take up to 720mm blades)
TP Packs electric conversion
modified Logo 24 canopy (very light)
ZPower Z50A-600 motor
Mavrikk metal grips & seesaw
JR metal tail slider
dual carbon battery mount plates
JR DS811 servos on aileron/elevator
JR DS8311 on collective
9252 on tail
GY401 gyro
Logo 24 tail boom supports
metal swashplate
metal elevator A-Arms
hardened stainless main shaft
carbon tail fins
Raptor 90 tail blades
Pics show an AP2000i flight stabilizer, Castle 85HV ESC, and BEC but those are not included. I can include them for an additional amount. email me for more info.
This is capable of hauling up to 6lb of payload. I used to have a custom front camera mount on it as well as a 360° underslung mount. On 10s5000 FlightPower packs it would get around 8 minutes of time fully loaded at 14lb. If lightly loaded at less than 12lb you can expect 10 minutes.
The motor is perfect for this heli. In 100°+ ambient temp days I would rarely see the motor get above 155°.
I have flown this bird for about 50-60 flights on aerial photo/video missions. It has always done well and has been well maintained.
$685 shipped
http://azchoppercam.com/forsale/raptorap/1.jpg
http://azchoppercam.com/forsale/raptorap/2.jpg
http://azchoppercam.com/forsale/raptorap/3.jpg
http://azchoppercam.com/forsale/raptorap/4.jpg
http://azchoppercam.com/forsale/raptorap/5.jpg
http://azchoppercam.com/forsale/raptorap/6.jpg
http://azchoppercam.com/forsale/raptorap/7.jpg
http://azchoppercam.com/forsale/raptorap/8.jpg
http://azchoppercam.com/forsale/raptorap/9.jpg