g35lin
09-13-2007, 07:05 PM
Almost RTF E-Flite CP PRO
Bought this Heli approximately 2 months ago. Had some fun with it. had a couple of crashes with it but then put it back together with brand new either oem or aftermarket(microheli) parts.
So why is it ALMOST RTF? Well, i bought the microheli chassy thinking that it'll work better so that you don't have to deal with gluing the boom back on everytime you hit it or break it. So i put it all together and it looks really nice and stuff but it won't lift. I checked everything 5 times and thought it was the pitch, but it wasn't. Conclusion: Need BRUSHLESS motor and ESC. Thats most likely the only thing you will need. another $100 to make it fly probably. Everything else is flawless or new.
Why buy this bird?
Its basically upgraded to a good point where its going to fly pretty well. You can start learning autorotation with it also since i have the upgrade from microheli. All you need is a brushless motor and esc. I've also upgraded to the twin tail rotor setup so the tail is more responsive.
Whats in the auction:
-CP Pro with Microheli alum chassy($65, never flown or crashed), plastic blades($20), microheli dual tail motor setup($25), microheli main shaft($8) with auto rotation main gear($30) (never flown or crashed) and microheli verticle tail CF holder($12).
-CCPM radio with radio frequency at 72.790
-Eflite recommended headholding Gyro ($90)
-2X E-flite Batteries($30)
-1X Thunder Power Li Po Battery 910mAh / 11.1V 3C ($40)
-Wall plug(which was not included, had to buy)
-Charger
Extras:
-Brand New Plastic Symmetrical Blades www.jcshobbies.com $20
-NEW E-flite Flat bottom blades $16
-NEW E-flite Symmetrical Main Blades $18
-NEW E-flite Carbon Main Blades $30
-NEW 3X Landing Skid Set ($15)
-New Retaining Pin
-NEW Bearings 2X6X3
-NEW Main shaft & Drive Gear ($6)
-NEW Training Gear ($15)
-New Hardware set (screw set)
-New microheli main shaft ($8)
Total MY Cost $650!!!!!!!
For sale for $350 + shipping.
My loss is your gain. Please bid accordingly. Good Luck
Thank you for your time.
Bought this Heli approximately 2 months ago. Had some fun with it. had a couple of crashes with it but then put it back together with brand new either oem or aftermarket(microheli) parts.
So why is it ALMOST RTF? Well, i bought the microheli chassy thinking that it'll work better so that you don't have to deal with gluing the boom back on everytime you hit it or break it. So i put it all together and it looks really nice and stuff but it won't lift. I checked everything 5 times and thought it was the pitch, but it wasn't. Conclusion: Need BRUSHLESS motor and ESC. Thats most likely the only thing you will need. another $100 to make it fly probably. Everything else is flawless or new.
Why buy this bird?
Its basically upgraded to a good point where its going to fly pretty well. You can start learning autorotation with it also since i have the upgrade from microheli. All you need is a brushless motor and esc. I've also upgraded to the twin tail rotor setup so the tail is more responsive.
Whats in the auction:
-CP Pro with Microheli alum chassy($65, never flown or crashed), plastic blades($20), microheli dual tail motor setup($25), microheli main shaft($8) with auto rotation main gear($30) (never flown or crashed) and microheli verticle tail CF holder($12).
-CCPM radio with radio frequency at 72.790
-Eflite recommended headholding Gyro ($90)
-2X E-flite Batteries($30)
-1X Thunder Power Li Po Battery 910mAh / 11.1V 3C ($40)
-Wall plug(which was not included, had to buy)
-Charger
Extras:
-Brand New Plastic Symmetrical Blades www.jcshobbies.com $20
-NEW E-flite Flat bottom blades $16
-NEW E-flite Symmetrical Main Blades $18
-NEW E-flite Carbon Main Blades $30
-NEW 3X Landing Skid Set ($15)
-New Retaining Pin
-NEW Bearings 2X6X3
-NEW Main shaft & Drive Gear ($6)
-NEW Training Gear ($15)
-New Hardware set (screw set)
-New microheli main shaft ($8)
Total MY Cost $650!!!!!!!
For sale for $350 + shipping.
My loss is your gain. Please bid accordingly. Good Luck
Thank you for your time.