DavidH
09-14-2007, 11:15 AM
OS 91 CSpec has the Blue Hyper head that was on the PS. Top fin had been taken off, along with 4mm machined off each side of the head. This was done so it would fit in fan shroud with modifying fan shroud.
This material was machined off with fly cutter.
OMI Big Bore carb with Cline installed. This is the 60K carb that OMI increases the bore of the carb to 10.8mm and installs the Cline and increases the needle openings to flow more fuel than stock. To purchase this carb from OMI would be $300. That is $200 for the big bore and Cline, then over $100 for the carb.
Engine has had about 4gallons thru it since new bearings were installed, New piston ring was also installed at that time.
Price $250.00 includes shipping to lower 48.
Cashiers Check or USPS Money Order
This material was machined off with fly cutter.
OMI Big Bore carb with Cline installed. This is the 60K carb that OMI increases the bore of the carb to 10.8mm and installs the Cline and increases the needle openings to flow more fuel than stock. To purchase this carb from OMI would be $300. That is $200 for the big bore and Cline, then over $100 for the carb.
Engine has had about 4gallons thru it since new bearings were installed, New piston ring was also installed at that time.
Price $250.00 includes shipping to lower 48.
Cashiers Check or USPS Money Order