rc-hq
09-15-2007, 05:34 PM
I recently received a JR 6102 Tx and R770S Rx in a bundle of other items I purchased. The radio arrived sans crystal, so I ordered a JR channel 43 Tx crystal to match the 43 in the Rx.
The problem is, I can't seem to get them to communicate. The Tx appears to function properly, and I have even tested it on a PC with a trainer cable. It is sending signals at least in that respect.
As far as the receiver goes, when I attach a battery and test servo, the servo does initialize, but does not respond to Tx inputs.
I'm at a loss. What further can I do to troubleshoot this issue?
Thanks for any and all assistance.
The problem is, I can't seem to get them to communicate. The Tx appears to function properly, and I have even tested it on a PC with a trainer cable. It is sending signals at least in that respect.
As far as the receiver goes, when I attach a battery and test servo, the servo does initialize, but does not respond to Tx inputs.
I'm at a loss. What further can I do to troubleshoot this issue?
Thanks for any and all assistance.