confuse : VBAR tail and normal Gyro tail

[jyheli]

Hi,

Having problem lead the first pair of tail and main blades gone after hitting the ground on first spool up with VBAR on log 500 3D.

I setup the tail with gain at 35%, but on spool up it seems like I might have the rubber hlding the wrong direction. I can try to reverse the senor direction, but want to be sure before i kill another blades.

The interesting thing is that before VBAR I am using Logictech 6100T with its servo and I know the headholding will move the blades during bench test moving the heli left and right. You can see the correction the gyro is doing.

But on VBAR, I dont see the correction when I move the tail left or right? Is this normal for VBAR tail setup?

Jonathan

[willy]

I do the same test on the bench but with power up and no main blades on, that way you can tell is sensing direction correctly , it will resist when you push to the side, the same result from doing with non v-bar also, so look for this before you fly.also a good way to check the tail for vibrations and balancing.