PDA

View Full Version : Got my h18/11 1000w motor form readyHeli


concept1
09-17-2007, 08:18 AM
Well got the new motor from Ready Heli Sat Am, and had a chance to get in a few flights this weekend.
i was running the stock 850kv motor with RCP carbom 500mm blades and early last week i got the metal grips. This new motor Really Rocks. it deffinatly will out perform a raptor 50 with a Muscle pipe now. I can't imagine the 1500w motor. I am still running the stock Gaui 50 amp esc and it seems to have no problems, with the stock motor I was getting a little over 6 minutes with evo 2500 packs and just under 6 with the 2170 packs. Now with the new motor I get 4.5 minutes but it is much harder crisper flying. I can do 4.5 minutes of flips, rolls,and sloppy funnels and tic tocs since my timming isn't the best yet. If I just fly around I can probalby do better on time but I just had som much fun with it i couldn't slow down.
my throttle curve was 100 95 90 95 100 and I did not tach it but I had more then enough head speed, flips and rolls were very fast. I had the stock 14t pinion and could probalby drop down to a 13t but not sure if i can get a 13. it also still flies on the 2170 packs with no problems but you are looking at 4 minutes of flight, of not quite as hard of flying. now with this setup it Blows away my Trex 450 with the JGF450 in everything. and also out performs my old Gohbee 50 /Raptor

Fredrick
09-17-2007, 11:32 AM
tnx for sharing info:) i am waiting for my Z20 engine and can't wait to try it.
got a couple of 3200 mah packs to go with it an a Schulze esc, i can recomend the esc... it's very good.