528hemi
09-18-2007, 12:24 PM
I posted this in the build video forum and was told this is a better place to get answers so here is my question. Was originally for Finless regarding the trex600n build. Anyone feel free to answer.
Finless,
Is there a way to disable the ATG gov with an additional switch for all 3 flight modes? Before watching your video I was able to setup 2 RPM's on st1 and st2, leaving normal mode Gov disabled which functions with aux2 switch high and when I put aux2 switch low it disables the gov in all 3 Fmodes....
I did this by using 3 mixes and initially setting aux2 to aux2 NOT Fmode. Thing is, I like your tip to create 1 more mix to cut the throttle but dont have 4 mixes.
So
just trying to see if it is possible to use your setup but go 1 step further and be able to disable the Gov on all 3 fmodes by flipping 1 switch like ( aux2).
Do you see a benefit to be able to disable the Gov in all 3 fmodes tied to the aux2 switch? Might be nice to be able to tweak your throttle curves? just not sure it can be done with only 3 mixes?
Finless,
Is there a way to disable the ATG gov with an additional switch for all 3 flight modes? Before watching your video I was able to setup 2 RPM's on st1 and st2, leaving normal mode Gov disabled which functions with aux2 switch high and when I put aux2 switch low it disables the gov in all 3 Fmodes....
I did this by using 3 mixes and initially setting aux2 to aux2 NOT Fmode. Thing is, I like your tip to create 1 more mix to cut the throttle but dont have 4 mixes.
So
just trying to see if it is possible to use your setup but go 1 step further and be able to disable the Gov on all 3 fmodes by flipping 1 switch like ( aux2).
Do you see a benefit to be able to disable the Gov in all 3 fmodes tied to the aux2 switch? Might be nice to be able to tweak your throttle curves? just not sure it can be done with only 3 mixes?