CastleCreations USB Programmer

[WillJames]

Hi Everybody,

I finally got a chance to use my CC USP PHX-Link USB Programmer today. Man was that cool and easy. I flashed 4 CC25's and my CC10. Did it all in 10 minutes. Easy and cool. Now if I can just figure out what all the settings do. :)

I will have this unit with me at all the events I attend, so if you want to check your settings or flash to the latest BIOS, catch up with me and you can see for yourself just how easy it is. :D

[cmbheli]

Also or those who dont know cc 25's has a new autodetect feature for how many cells you are running.If you have a older version,when you download the software from the site the programmer will automatically install the feature to your old esc.

[big-al]

all the smaller (10 and 25) and maybe bigger brushless controllers now have the capability of auto detect with the latest firmware upgrade. it's great BTW.

will you're absolutly right on the interface. it takes 5 min to find the cable and another five to do all the updating/settings. :)

there is another supplemental instruction set on their site that goes thru all of the options and gives an explanation of each.

http://www.castlecreations.com/documents/Explanation%20of%20PHX-Link%20Settings.pdf

[WillJames]

Thanks Al, that is EXACTLY what I was looking for. Gotta reset all my CC 25's today. Must be about 10 minutes work. :)

Thank you!!

[rob_jones]

Yup, the PHX-Link rocks. No doubt! There are some things you can only set using it - the move-stick-beep-move-stick method can't get into all the nooks and crannies.