Rdrunner
09-21-2007, 10:45 AM
Hey Guys, Thought I would share this info, I received from RF Tech Support.
I wanted to use my TX to practice onRealflight 3.5 but could never get it to work, I
contacted RF tech support, and here is what they have recommended. Hope this will help someone :) :
While the Heli-Max controller does work in RealFlight G3, you may experience
some difficulty getting the controller to function as you would like. There are
some necessary steps that must be taken in order for the radio to work
correctly.
1. You will need to go into Aircraft and then Edit Heli-Max Axe CP.
2. In the Aircraft Editor, click on the words "Heli-Max Axe CP".
3. Look in the Parameter column on the right hand side until yo see the words
Radio Type.
4. Change the value next to Radio Type from "Software Radio" to "Pass Through".
5. Click File and then Save As in the top left of the Aircraft Editor.
6. Save the aircraft as "Heli-Max Axe CP-custom radio".
7. Close the aircraft editor.
8. On your transmitter change all of the servo reversing switches to the REV
position.
9. Go into Channel Mapping
10. Channels 2 and 6 should be reversed.
11. Try to fly around and adjust the trims as necessary.
*Keep in mind that the Heli-Max transmitter uses channel mapping by default and
that limits it's functionality in RealFlight G3*
PLEASE REMEMBER to attach all previous correspondence (and dxdiag information
if previously requested) with our responses to any follow up e-mail you may
send. This will allow us to better track our attempts to troubleshoot your problem.
Unfortunately, due to the volume of e-mail we receive, WE ARE UNABLE TO SAVE
OR REMEMBER E-MAIL MESSAGES ONCE WE HAVE SENT A RESPONSE.
You can also reach our product support technical team at 217-398-8970 during
our regular business hours Monday through Friday 8am to 7pm Central time. Be sure
to have your computer specifications and serial number for your software
available at the time of your call.
HAVE YOU SEEN OUR NEW WEB SITE?
In an effort to provide you with the fastest, most up-to-date support
available, we have developed a new web site dedicated specifically to answering your
questions or concerns regarding all versions of our software. Most of the
difficulties users have running our software are related to problems we have already
seen many times before, and have consequently developed reliable solutions to
correct. Please try visiting this new resource we have developed for you. Most
likely your problem or concern has already been encountered before and the fix or
answer you need is already there waiting for you! You can visit this new site
at www.gpsoftware.com (http://www.gpsoftware.com/) . Please give it a try!
I wanted to use my TX to practice onRealflight 3.5 but could never get it to work, I
contacted RF tech support, and here is what they have recommended. Hope this will help someone :) :
While the Heli-Max controller does work in RealFlight G3, you may experience
some difficulty getting the controller to function as you would like. There are
some necessary steps that must be taken in order for the radio to work
correctly.
1. You will need to go into Aircraft and then Edit Heli-Max Axe CP.
2. In the Aircraft Editor, click on the words "Heli-Max Axe CP".
3. Look in the Parameter column on the right hand side until yo see the words
Radio Type.
4. Change the value next to Radio Type from "Software Radio" to "Pass Through".
5. Click File and then Save As in the top left of the Aircraft Editor.
6. Save the aircraft as "Heli-Max Axe CP-custom radio".
7. Close the aircraft editor.
8. On your transmitter change all of the servo reversing switches to the REV
position.
9. Go into Channel Mapping
10. Channels 2 and 6 should be reversed.
11. Try to fly around and adjust the trims as necessary.
*Keep in mind that the Heli-Max transmitter uses channel mapping by default and
that limits it's functionality in RealFlight G3*
PLEASE REMEMBER to attach all previous correspondence (and dxdiag information
if previously requested) with our responses to any follow up e-mail you may
send. This will allow us to better track our attempts to troubleshoot your problem.
Unfortunately, due to the volume of e-mail we receive, WE ARE UNABLE TO SAVE
OR REMEMBER E-MAIL MESSAGES ONCE WE HAVE SENT A RESPONSE.
You can also reach our product support technical team at 217-398-8970 during
our regular business hours Monday through Friday 8am to 7pm Central time. Be sure
to have your computer specifications and serial number for your software
available at the time of your call.
HAVE YOU SEEN OUR NEW WEB SITE?
In an effort to provide you with the fastest, most up-to-date support
available, we have developed a new web site dedicated specifically to answering your
questions or concerns regarding all versions of our software. Most of the
difficulties users have running our software are related to problems we have already
seen many times before, and have consequently developed reliable solutions to
correct. Please try visiting this new resource we have developed for you. Most
likely your problem or concern has already been encountered before and the fix or
answer you need is already there waiting for you! You can visit this new site
at www.gpsoftware.com (http://www.gpsoftware.com/) . Please give it a try!