ps61785
09-21-2007, 09:43 PM
I have for sale a like new HDX 450 from Helidirect with approximately 30 – 40 flights. This heli is similar to a TRex 450. I have many upgrades and add-ons to this and only the best parts were used when building this heli. It has never done any 3D flight as I have not progressed to that stage yet. The reason I am selling this heli is that I wish to build a bigger one therefore I want to sell this heli to cover the majority of the cost associated in building a new 500 size heli.
1 - HDX450 SE Kit - $299.99
2 - Venom Power LiPo 3s 20C 2100mAh Packs - $74.99 x 2 = $149.98
1 - MicroHeli Tail - $94.50
1 - Castle Creations Phoenix 35 ESC - $89.95
1 - Align 430XL Brushless Motor - $55.99
1 - Spektrum AR6000 Receiver - $49.99
4 - Hitec HS56HB Cyclic Servos - $24.99 x 4 = $99.96
3 - JR DS285 Digital Cyclic Servos - $34.99 x 3 = $104.97
1 - Futaba S9650 Digital Servo for Tail - $49.99
1 set - Hyperion 325mm Carbon Fiber Blades - $29.99
1 set - CYE Radix Blades (Carbon Fiber) - $44.99
1 set - Hyperion Carbon Fiber Tail Blades - $16.99
Many Spare Parts also included.
Total Invested: $1087.29 +
Many spare parts and accessories that I have for the heli include misc. screws, feathering shafts, main shafts, servo horns, tail pushrods, main hub and original tail unit. I also have spare aluminum tail booms from align that work with the heli but I currently have the carbon fiber tail boom installed to save weight. The heli has never been crashed but I purchased most of the spare parts in the event that I did as I was still learning when I originally purchased this heli. I assembled the heli with great care and took time to plan out wire routing and electronics placement. I did have a problem with main blade balancing during the first couple flights so I replaced the main hub and main shaft only to find out that the culprit was bad main blades. All has been worked out and this heli flies great and is rock solid. The Gyro that is installed on the heli will be removed, as I wish to use this on the new kit. In order to fly you will need to add your own gyro as well as your own transmitter. The AR6000 receiver will work with a Spektrum DX6 or DX7 and I am unsure if this will work with Spektrum add-ons for other radio systems.
ASKING - $750.00 OBO + shipping. Will consider reasonable offers only. Paypal and Cashiers Checks accepted. Please allow 10 days for checks to clear before the item will be shipped. Im a trusted EBay member, check my feedback on Ebay, Member Name: racerguy85 and buy with confidence.
If I have forgotten any specifics or you have a question about the heli please email me at ps61785@hotmail.com. You may also submit reasonable offers to be considered to this email address as well. Thanks for looking.
1 - HDX450 SE Kit - $299.99
2 - Venom Power LiPo 3s 20C 2100mAh Packs - $74.99 x 2 = $149.98
1 - MicroHeli Tail - $94.50
1 - Castle Creations Phoenix 35 ESC - $89.95
1 - Align 430XL Brushless Motor - $55.99
1 - Spektrum AR6000 Receiver - $49.99
4 - Hitec HS56HB Cyclic Servos - $24.99 x 4 = $99.96
3 - JR DS285 Digital Cyclic Servos - $34.99 x 3 = $104.97
1 - Futaba S9650 Digital Servo for Tail - $49.99
1 set - Hyperion 325mm Carbon Fiber Blades - $29.99
1 set - CYE Radix Blades (Carbon Fiber) - $44.99
1 set - Hyperion Carbon Fiber Tail Blades - $16.99
Many Spare Parts also included.
Total Invested: $1087.29 +
Many spare parts and accessories that I have for the heli include misc. screws, feathering shafts, main shafts, servo horns, tail pushrods, main hub and original tail unit. I also have spare aluminum tail booms from align that work with the heli but I currently have the carbon fiber tail boom installed to save weight. The heli has never been crashed but I purchased most of the spare parts in the event that I did as I was still learning when I originally purchased this heli. I assembled the heli with great care and took time to plan out wire routing and electronics placement. I did have a problem with main blade balancing during the first couple flights so I replaced the main hub and main shaft only to find out that the culprit was bad main blades. All has been worked out and this heli flies great and is rock solid. The Gyro that is installed on the heli will be removed, as I wish to use this on the new kit. In order to fly you will need to add your own gyro as well as your own transmitter. The AR6000 receiver will work with a Spektrum DX6 or DX7 and I am unsure if this will work with Spektrum add-ons for other radio systems.
ASKING - $750.00 OBO + shipping. Will consider reasonable offers only. Paypal and Cashiers Checks accepted. Please allow 10 days for checks to clear before the item will be shipped. Im a trusted EBay member, check my feedback on Ebay, Member Name: racerguy85 and buy with confidence.
If I have forgotten any specifics or you have a question about the heli please email me at ps61785@hotmail.com. You may also submit reasonable offers to be considered to this email address as well. Thanks for looking.