PDA

View Full Version : charger


dorfmann
03-03-2005, 05:09 PM
The web site says that the chargers will do ion and poly. Is that correct? What do you recommend for a foamie?

Cory

DavidH
03-03-2005, 05:52 PM
Yes the Duralite charger will charge Li-Ion and Li-Po batteries.
If your going to charge 3 cell packs that are up to about 2000 mah capacity
Then this one

#21011ST - Charger
1 TX output, 11.1 volt w/DC cable

2 cell packs then you will need this one

#21007 - Charger
1 RX output, 7.4 volt w/DC cable

If your going to charge 2 cell and 3 cell packs, this is the one you will need
#21711 - Charger
3@7.4 volt RX output - 1@ 11.1 volt TX output w/DC cable



you will need this if your going to use AC as power source
#21915 - A/C Adapter



David

dorfmann
03-03-2005, 06:18 PM
Cool. I was looking at the 3 cell 11.1v/1050mah. So, I will go with the 21011ST. If I get around to a D-lite trans pack, then I will be killing two birds with one stone. :cool: