PDA

View Full Version : Bantam BC6 and cellpro packs

Bunter
09-22-2007, 05:45 PM
Hi

I'm all set to buy battery packs and a charger for my new Mini Titan and have settled on either the Bantam BC6 or the CellPro 4S Balancing Charger. I plan on buying CellPro Revoution packs and I have a couple of questions about these systems.

1. Can I charge 2 packs at once with either of these chargers?
2. What connectors boards would I need with the BC6 to connect to Revolution (CellPro) packs

Many thanks in advance

Bill
RC Accessory
09-22-2007, 09:39 PM
Bantam support nearly all lipo taps, except FMA batteries. You would have to source the recepticle end that FMA uses and then solder up your own wiring harness. I am unaware of anyone that supports the FMA node connector as they call it other than the FMA chargers.
Bunter
09-23-2007, 09:24 AM
Thanks for the reply.

Bill
RC Accessory
09-23-2007, 11:13 AM
The FMA packs are Kokam's. If you like the packs, just get the Kokams and there is an adapter for the Kokams. Tower Hobbies sells the Kokam's.
screwbirds
09-23-2007, 11:40 PM
Evan, I am looking to purchase a Bantam BC6 charger/balancer and wondering do they are include a wiring harness for Thunderpower/Flightpower packs?
RC Accessory
09-24-2007, 05:18 AM
Evan, I am looking to purchase a Bantam BC6 charger/balancer and wondering do they are include a wiring harness for Thunderpower/Flightpower packs?

The BC-6 includes whatever adapter you would like. Simply select the adapter you want from the pull down menu.

http://www.rcaccessory.com/index.asp?PageAction=VIEWPROD&ProdID=241

Thanks!
screwbirds
09-24-2007, 11:24 PM
Evan, thanks for the reply and will get one soon.