BFashions
09-23-2007, 04:53 AM
Hi there,
I was wondering if anyone has had any luck getting the above combo to work.
I am having troubles getting the gyro to work and being able to set HH mode from the TX.
I have followed the following instructions,
http://www.digimemphoto.com/guides/backguide.htm
Which has a small bit on programming the HH mode,
"Press scroll and select the GER channel.
Place the Aileron DR switch to 0. Use the decrease button to set +45%."
What is happening at the moment is that I have the yellow cable going into Aux2 on my RS70 reciever, however when I do this the Servo will only travel one way, which means that it only works when giving it left stick, and moving the heli around does not prompt a response from the gyro...
Help! :)
TIA.
I was wondering if anyone has had any luck getting the above combo to work.
I am having troubles getting the gyro to work and being able to set HH mode from the TX.
I have followed the following instructions,
http://www.digimemphoto.com/guides/backguide.htm
Which has a small bit on programming the HH mode,
"Press scroll and select the GER channel.
Place the Aileron DR switch to 0. Use the decrease button to set +45%."
What is happening at the moment is that I have the yellow cable going into Aux2 on my RS70 reciever, however when I do this the Servo will only travel one way, which means that it only works when giving it left stick, and moving the heli around does not prompt a response from the gyro...
Help! :)
TIA.