tec548
09-29-2007, 09:36 AM
SOLD - T450SE V1.5 all carbon and metal heli align 35A ESC, 430XL with heat sink, 13t pinion align 325CF main blades set-up for 3200HS.
GY401 gryo with 9650 servo and HS65MG on the head.
5 x 3SFP2150 packs
AR6100 reciever
Spares in addition to the heli:
1 x align plastic blades - only good for hover training!
3 x metal blade grips
4 x main shaft
6 x feathering shaft
1 x boom
2 x tail fin and horizontal fin
1 x gorilla gear
2 x main gear and auto gear
1 x one-way removal tool
1 x pitch guage
1 x align 120 swash
1 x gyro mount
3 x tail blades
3 x fly blade
3 x fly bar
1 x fly cage
1 x metal mixing arms
1 x metal head
1 x metal seesaw
1 x metal control arms
1 x CF upper and lower frames
1 x engine mount
2 x battery tray
2 x glass canopy
3 x tail shaft
2 x tail drive belt
1 x 430XL motor (total of 2)
1 x 35A ESC (total of 2)
mics screws, bolts, nuts, spacers, bearings and much more.
This is enough spares to keep you in the air for a while. The heli is built and flys very well. The only things needed is a TX and charger to fly. Only selling this bird to make room for another Nitro. I'm asking $900.00 for everything listed here plus much more that I forgot to list. Feel free to PM any questions or offers.
Joel
GY401 gryo with 9650 servo and HS65MG on the head.
5 x 3SFP2150 packs
AR6100 reciever
Spares in addition to the heli:
1 x align plastic blades - only good for hover training!
3 x metal blade grips
4 x main shaft
6 x feathering shaft
1 x boom
2 x tail fin and horizontal fin
1 x gorilla gear
2 x main gear and auto gear
1 x one-way removal tool
1 x pitch guage
1 x align 120 swash
1 x gyro mount
3 x tail blades
3 x fly blade
3 x fly bar
1 x fly cage
1 x metal mixing arms
1 x metal head
1 x metal seesaw
1 x metal control arms
1 x CF upper and lower frames
1 x engine mount
2 x battery tray
2 x glass canopy
3 x tail shaft
2 x tail drive belt
1 x 430XL motor (total of 2)
1 x 35A ESC (total of 2)
mics screws, bolts, nuts, spacers, bearings and much more.
This is enough spares to keep you in the air for a while. The heli is built and flys very well. The only things needed is a TX and charger to fly. Only selling this bird to make room for another Nitro. I'm asking $900.00 for everything listed here plus much more that I forgot to list. Feel free to PM any questions or offers.
Joel