View Full Version : Best way to install magnets in metal fan?
mporlier
09-30-2007, 08:31 PM
I just need advice on what to use, CA, Epoxy?
Thank you.
Anthony.L
09-30-2007, 09:40 PM
CA
george0079
09-30-2007, 10:14 PM
I agree. CA is the way to go
torkboy
09-30-2007, 10:24 PM
Epoxy, CA would also work.
Jason Chow
10-01-2007, 12:14 AM
for my 3dx fan and throttle jockey magnets, the magnets were such a tight fit, ie> i had to use a press machine to really press them in and there is no way they are coming out, so i didn't use anything since i know the press fit will hold no matter what.
captcasper7
10-01-2007, 02:22 AM
20 min Epoxy, you don't want that sucker flying out.
aevans692
10-01-2007, 04:20 AM
bluetak
sbmon
10-01-2007, 06:34 AM
For metal to metal wouldn't JB weld be ideal?
Azlum
10-01-2007, 08:02 AM
I've used epoxy in a few metal fans for 600n's now, and it worked great in all of them.
Bayou Talker
10-01-2007, 08:41 AM
For metal to metal wouldn't JB weld be ideal?
JB Weld has metal in the mix so it could cause some problems. With that being said, many people are using it successfully. I personally use 30 minute epoxy.
carlos
10-01-2007, 08:52 AM
24hr epoxy working ok so far but you have to work the magnet in to squish out the excess epoxy.