Need to know Daniel Jetschin's Setup...

[nadavbarak]

Hi,
Can somebody let me know what is Daniel Jetschin's setup on his Logo 600?

Best Regards,
Nadav Barak.

[OICU812]

ESC: Kontronik Jazz 55-10-32
Motor: Actro 32-3
Pinion: 19tooth Herringbone Pinion Mod.7 with 153T main gear also mod.7
Blades: 600mm VBlade TSTs'
TR Blades: Vblade 105mm
Vbar System, using 9256 Futaba tr servo

Spektrum receiver, "which one I do not know"
Servos on cyclic: "unknown"
BEC or reg: "unknown"


Hopefully someone else, maybe even Danny himself might pop into fill in the "unknowns", lol cheers. :)

[LITHIUMSTATIC]

Danial talks about his setup in this thread.

http://www.helifreak.com/showthread.php?p=393992#post393992

He is also using 10s 4350 Lipos I assume Flightpower 5s wired in series.

[HFG]

His cyclic servos seems to change on a weekly basis.

[OICU812]

Danial talks about his setup in this thread.

http://www.helifreak.com/showthread.php?p=393992#post393992

He is also using 10s 4350 Lipos I assume Flightpower 5s wired in series.

Jeremy, FlightPower makes a 10S1P 4350mah stick, as well as a 5000mah one as well.

[nadavbarak]

what is preffered?
1 battery of 10S or 2 of 5S connected, and why?

Best Regards,
Nadav Barak.

[OICU812]

I would say that is more based around what you might have for chargers and balancer. If you own a balancer that only does up to 6S and/or charger than the two independent sticks might be the way to go. If you have for example a TP1010 charger and 210 balancer which both support up to 10S than a single 10S1P stick will certainly be a better option as it is one pack, single balance point as well and no series plug will be needed either. Lastly and this might be most important especially if you are speaking about FP lipos, on the single stick packs such as a 10S1P , each cell will be matched for both charging and discharging, where as seperate packs will not be, only to their individual pack. The performace will be close to the same however one pack may pull sightly more etc.... Hope that answers your question in this regards, cheers. :smokin:

[Daniel Jetschin]

Hey,

Powerjazz, 10s 4350 single stick, emcotec micro mps rv regulator, brushless tail servo, cyclics DS8517 w/o heatsink but 8v, AR 9000 RX


Thanks Shawn

[nadavbarak]

..

[JV]

Powerjazz and actro 32-3 is what I am using in my 90size machine, they should be incredible in a 600mm machine :-)

Which servo is the DS8517? I know the DS8717 and DS8715, but not the DS8517 :-)

Bye

JV

[Funky]

Hey,

Powerjazz, 10s 4350 single stick, emcotec micro mps rv regulator, brushless tail servo, cyclics DS8517 w/o heatsink but 8v, AR 9000 RX


Thanks Shawn


Does anyone know where you can purchase the Emcotec mps regulator?

EDIT: Nevermind, I found it..... http://emcotec.e-vendo.de/e-vendo.php?shop=k_emcotec_e