View Full Version : 6s battery
3sgte
10-05-2007, 07:23 AM
will the DN Power 4400 22.2v 6s brick pack work well and fit well in the xes? just worried that it wont fit under the canopy and also might be nose heavy with the xes short boom? also the pack is a 20c pack, is that enough for the stock motor and maybe in the future a better motor? thanks
Helifan
10-05-2007, 07:43 AM
I don't know the dimensions of that pack but I bet it is going to be way to big to fit under the canopy.
Without the canopy I am sure you could strap it on there some how. But like you mentioned I am sure you would have balancing problems.
Being a 20C pack at 4400mah that should give 88amps continuous. For the stock motor (800kv) that should be plenty. Even if that pack was rated at 10C it would give 44A.
My setup with the Century 600+ plus motor pushes around 40A continuous with 55A burst with 3D.
Raydee
10-05-2007, 07:49 AM
THe 550 is setup to run two 3s packs so I highly doubt one 6s pack will fit unless you get the new Carbon frame that just came out OR wait for the one that ReadyHeli will be selling.