flynn
10-05-2007, 08:53 AM
Hi,
Does anyone have a good setup for the DX6 with the HB2K. I like the copter but would like use my DX6 instead of the stock TX.
Thanks
borocouncilman
10-09-2007, 10:42 PM
I've had very good luck using the Blade CP programming as a starting point with my DX7.
damyxz
11-24-2007, 07:17 PM
You can set up the ff : If you are looking from the back of the heli, The right servo towards the tail goes to aileron(2), the right forward servo is the elevator (3) and the left one towards the tail is the pitch(6). The settings are: CH2=70%(reverse), CH3=70%(reverse), CH6= - 70%(norm). Just adjust your pitch and throttle curve as to what you like.