throttle sevro

[I want it]

Hey guys well Im building my 600n pro and would like to know what most of you are running for a throttle sevro. Im going to run the futaba 9351 on the cyclic and futaba 611 gyro and 9256 on the tail.

this heli is coming along its just slowed down cause of my sailplanes hahaha well now i want to get the heli done

[george0079]

I talked with Bob @ Aerospire about this just the other day. Because I just bought a Multigov myself. He says that the multigov supports servo speeds up to .10 sec.
The 9451 is a good servo for this. The 9254 (which I will be using) is a little overkill, but I have one that I'm not using.

Look for a servo that has speeds of .10 at 6V

[I want it]

cool,the 9451 is what i had planed on puttin in there as its listed on my list of equipment so guess ill go ahead and stick with that idea then.

[Ticidytoc]

I ran a futaba 9202 on 6V and a JR9000 on 7.4v, they both worked just fine and honestly, if there was a difference I couldn't tell. (must be my tuning skills) ;)

:smokin: