how to solder TP balance connector

[uragano47812]

Hello i have 3 pack of 4s 4300mah 20C lipos and i want to do 2 packs of 6s. The questions are:

1- There is a easy way to disassemble one pack of 4s into 2x2s? I like to know if there is a way to take away the tape between two cells

2-Where can i buy the TP connector to solder on 6s packs?

3- And most important which is the diagram to solder the connector respecting the poles?

Thanks

[RexChop]

1- ? Just take one pack apart first. Or just buy 3-2s 4300 packs.

2- TP 6s to 8s uses one 6 pin and one 4 pin

http://www.rchover.com/inc/sdetail/60558

http://www.rchover.com/inc/sdetail/60557

You can probably just take apart the new plastic connectors, take the pins out of the old connectors and insert the pins in the new connectors in the right order without soldering and just solder the existing + and - leads together to join the cells in each pack.

3- Scroll to middle of page

http://www.flightpower.co.uk/index.asp?currency=USD&page=Products/index.asp^currency=USD

[uragano47812]

Thanks