900 MHz and 72 MHz interference

[Cryofix]

hey all,

Got a small problem, I have a 900 MHz downlink connected to my A640 and a 72 MHZ running the mount, when everything is connected and the camera is turned on, my mount glitches like crazy, once I shut the camera off the mount stabilizes.

Any Idea why video feed would interfere so bad with 72 MHZ?

Also any suggestions on how to get rid of it.

Thanks!

[MarkWebber]

How close is your downlink tx to your mount rx? I put mine on the other side of the mount. If the antenna's are in close proximity, you could be getting such interference.

[Cryofix]

It actually dont matter where it is I have taken the 72 rx off and moved it all over to see where the least interference occurs and I still get interference no matter where it is, however some is worse than others but I can not get the mount to stay still.

The mount pulses slightly no matter what or where the the rx is.

I have changed power sources, split power sources, moved wires, stood on one leg with one hand over my head, and nothing seems to work =)

I may look into a dx6

[Cryofix]

Think I got it but its weird, G-10 has no conductivity correct? but only when its attached to the G-10 does it casue interference.