Rotorworkz T-600 Nitro frame Set

[Rotorworkz]

Hello All,

I am proud to introduce Rotorworkz latest creation of a frame set for T-600 Nitro Below is pictures for the Silver and Carbon fiber kit (G-10 will also be available)
Frame features are also listed in the picture below

Introductory prices are set as full kits pictured below, quantities will be limited for this first run Release of kit will be next week

CF Kit $149.95
Silver Kit $94.95
G10 kit $74.95

Best,

Charley

[jlasater]

fwiw...


You've done it again, Charley! Thanks!!

John.

[aamwood]

What is the thickness of the G 10 ?

[tchavei]

Hi

Those Frames look slick. Could you please post the weight of the frames and the bottom plate?


Just for comparison:

The stock 1.6mm is 70.3gr per side + 2.5gr (6 servo nut plates)
1.6mm bottom plate is 23.9gr

The infinity 2mm cf is 91.8gr per side (including 12 metal nut inserts)
the 2mm bottom plate is 24.3gr

[Hotwings]

Waiting for mine, please give it to Foxden as i am out of town for 10 days, thanks Ron

[fixxxer]

G-10's look very nice.

[Rotorworkz]

Material Thickness for "all" kits is 2mm

Weights can vary frame panel to frame panel due to + or - frame thickness tolerances but the CF frame kit shown in picture
Side frame Weight with 12 inserts is 105 gram
Base Plate 25 gram


I will have pictures soon of the kit installed on a heli

Charley

[JEFFRO503]

Hey charley.....This post could not have come at a better time. I will be getting a new T-rex 600 kit within the next month or so and doing a winter build on it. I am kind of new to the Heli's , so i have a couple quick questions......

1.) The new CF frame for the 600 N , does it move the motor or any electronics around from the standard position? I had seen some of the T-rex 600 E kits you made like the HFX frame.....and am wondering if you might of done something similar to the 600 N frames in anyway.

2.) do you plan on designing any type of a 600 N HFX frame of any kind?


I know by reading the posts on here at some over at RR , guys swear by your frame sets you make , so i wanted to just build it with you frame set from the ground up anyways.

Thanks Charley......great work by the way.


Jeff

[Anthony.L]

How about some pics of a assmebled frame??

[rototiller]

Dump question.......Whats the advantage of your frames over stock ??

DK

[tchavei]

I guess they are stronger, cheaper, better looking and have some nice goodies bundled with them.

If I hadn't a spare set of infinity frames, I would order these right away.

Someone interested in my set? I'll sell them cheap :)

[tchavei]

Ok, I can't wait any longer. Where can I order them? :shock:

Tony

[Rotorworkz]

Jeff, Not sure yet If if there will be a nitro similar to HFX Maybe if there is enough interests?

Anthoy L. , Pics Are below for the Silver version

rototiller, Review the first post with pics that gives features then compair that with your stock also total up all the parts in the kit and compair it beside Aligns price since this frame has upgraded stiffiners etc... add that to the price as well :D

Frame kits are looking to be available next week

[rototiller]

Sorry, I missed the feature pic. Thicker carbon than my glass frames for 50% more. Nice. When I break my frames I know what is replacing them.

DK

[JEFFRO503]

DAMN........those frames are schweeeet!!

[Foxden]

Hey Charley,

The new Rotorworkz logo avitar looks bad azz.

These frames like all of Rotorworkz products are top notch.

[helidirect]

yep looks like a mad fox :)

Steve

[Rotorworkz]

Thanks Clyde I like the Logo addition myself :D

Charley

[Ticidytoc]

Wow 2mm, cool. Guess my 1.5mm are a collectors item now. ;) Bidding starts at..... J/K

Good job on the frames Charlie.

[tchavei]

I'll take the 1.6mm if the price is right :)

Tony

[Anthony.L]

Available yet? No update on the web site yet.

[Rotorworkz]

Almost
Sorry guys that it is taking so long I have a lot new products and HUGE break throughs that is fixing to hit the market!!

I will post when 600n frames are ready which will be soon


Charley

[rototiller]

Cant wait to see what you have.

DK

[tcast305]

Hi all,

I received a set of the pre-production frames from Charley. They were the black g10 2mm frames for the 600n.

The quality of the frames ofcourse are high quality as excepted from Rotorworks. The press nuts are a nice touch (no more removing extra servos to get others in), also so are the break away tabs for the canopy mounts. I didn't yet get a chance to use the mixure servo plate yet. I also like the frame supports go between the mid to the front of the frames (nice touch).

Below are pics of the frames and the install of them into a new pro kit I put together.

Thanks.

[Hotwings]

Hey Charlie, thanks for the new cf frames for my nitro, waiting for upgrade opportunity to install them. Ron