View Full Version : raptor 90 upgrade
Hassan
10-24-2007, 04:12 PM
This is a raptor 90 se upgraded with carbon frames. I noticed on the upgraded frame, the tail servo is placed below the boom which makes it impossible to fit the pushrod unless u bend it. What shall I do?
ferincr
10-24-2007, 04:24 PM
I haven't checked mine since I decided to install it at the front, but I guess there it should be a way to do it.
I'll check...
ferincr
10-24-2007, 04:42 PM
Ok, I checked the pic again and realized that you have a different tail drive unit, so I'm not good help here (either:o)
Is that the one from QuickUK?
ghtracey
10-24-2007, 06:19 PM
The 50 kits tell you to put a 15degree bend in the pushrod to line it up with the ball on the servo.
Hassan
10-25-2007, 05:46 PM
The 50 kits tell you to put a 15degree bend in the pushrod to line it up with the ball on the servo.
Yes I agree...this would be a logical thing to do. Thanks for your help.