Stock with + 35A ESC.. ok or not

[zeese5]

Hi guys..
Is it ok to match stock motor OBL 29/35-10H, with my currently owned
align 35A (RCE-BL35X) esc..

Does this setup gives a problem? Can I do mild 3D with this setup?
Many people says, this motor is good if used with 40A esc.. I don't want
to increase "pain" by having to buy a new ESC as well..

the spec for this motors says
-KV rating: 3500 RPM/V
-Max efficient current: 4 ~ 20A
-Max surge current: 30A / 60s

It seems, maximum current is 30A.. then, why is it good with 40A esc when
35A esc also already passes the minimum spec requirement?

Thanks..

[devious17]

zeese5, the stock e325 motor is going to draw up to 40A and with a 35A max esc you run the risk of the ESC cutting while doing manouvers. Fellow flier with such setup has crashed due to this.

[brovic777]

The Align 35esc can have up to 45amp draw. You should be fine IMO.