Balance Leads - 6S EVO 25 Flightpower

[KarbonBird]

I see that there are 2 balance plugs on the 6S Flightpower batts - what order should this be plugged into the hyperion balancer adapter? 4 pin 1st ... or 6 pin 1st ... or doesn't it matter??

[DebianDog]

The one with the black wire is what I always use. Not sure it matters.

[willy000]

i plug which ever in in my hand first, havent had a problem in 10 months
i dont think it matters too nothing was in the instructions when i got mine.........

[PsychoPilot145]

FYI... If anyone reading this uses the TP-210, you will need to plug the big lead in first.

[ChasHeliCop]

You plug the six pin first, then the 4 pin, then the power connector. You will notice the charger/balancer doesn't initailize until you plug in the 4 pin, thus recognizing all 6 cells. Now I have to go find where I read that.

[KarbonBird]

Thanks all for the feeedback ... looks like the 6 pin is the winner, followed closely by the 4..

Cheers

Rossco

[willy000]

thaks for that info too, i didnt really think it matters buy the way its
been explained in makes sence so i guess ill be doing that way from
now on too

[Pinecone]

I know with the TP 210V, if you plug in the A plug and don't get the B in fast enough, it reads at a lower cell count. So plugging in the B first is more consistant.