View Full Version : GY240 on stock tail?
jhudson44
10-30-2007, 10:01 PM
Yep, well i have a GY240 now and well can i set this up with this stock tail?
if so how?
carlo_the_wonder_frog
10-31-2007, 06:27 PM
Yes, turn your 3-in-1 gain to 0 and also proportional to 0. connect the new gyro and set it up. go fly. You can go to horizon hobby site and download the CPpro handbook, in there are specific intructions on how to use a G90 gyro, hook the 240 up the same way.
jhudson44
10-31-2007, 07:25 PM
awsome thanks bro!
im sure it doesnt but before i get to doing it it does not matter that i have the eflite 2 in 1 does it?
thaiboxer
10-31-2007, 07:51 PM
I think you have the 3-n-1 they used to sell the blade with a 4-n-1 but they split out the receiver and mount it to the 3-n-1 now.
It has been a while since I checked out the updtes on these things though. So I may be a little old school.
istandalone
11-02-2007, 05:15 PM
you don't need to add an esc for the tail like in the axe cp? or are you saying that you can in fact use the 240 without having to buy a small esc for the tail motor?
thaiboxer
11-02-2007, 08:50 PM
When I went brushless I found I had to run an ESC on the tail or it didn't have a solid hold. If you keep it stock you will be fine without anything else.
carlo_the_wonder_frog
11-03-2007, 02:25 AM
you don't need to add an esc for the tail like in the axe cp? or are you saying that you can in fact use the 240 without having to buy a small esc for the tail motor?
Yes you can run a HH gyro using all the stock electronics, mind you this is on the CP Pro 3-in-1 only with separate receiver, it won't work without modifications on the blade Cp or 4-in-1.