Inverted problem

[cabbie1]

I'm having a problem when I try inverted flight, the heli just gently floats to the ground no matter what input I give the controls, I re-calibrated the TX 3 times!!

This is with a DX7.

Thanks.

[jrohland]

Most likely you have your throttle curve linear from 0 to 100 on DX7. In that case, when you pull your left stick (mode 2) down to give negative pitch, you are pulling the throttle down.

I recommend you set your DX7 to have either a flat or V shaped throttle curve in flight mode 1 and/or 2. Do inverted in flight mode 1 or 2.

This (http://www.helifreak.com/showthread.php?t=34568) thread shows how I setup my DX7 for Phoenix.

Some heli models are not able to do inverted flight. Make sure you test with one of the 3D models.

jrohland