Mini Titan e325

[Jonathan Ott]

Thunder Tiger Mini Titan e325.

I got this heli a couple weeks ago, bought it used. It is in great shape and well built. It will need a new set of main blades, but is otherwise in great shape.

Align brushless motor (decal on the top says 3550 Kv) and 35A speed controller
Telebee gyro
Tower pro 9g servos (4)
some spare parts (feathering shafts (2), flybar shaft, main shaft, misc. screws/links/balls)
blades in 'okay' shape, could use a new set
Blade holder
partially used decal sheet
(2) 1800 mAh li-po's (one puffed by previous owner, black one in pic)

$315 shipped

I can set it up completely RTF with TX & RX for an additional $125
JR X388S PCM on ch 25 with a Hitec Electron 6 receiver. Aluminum carring case for the TX included. I'll do the basic programming and test hover for you. The only thing you will have to do when you get it is put a ch 25 crystal in the receiver (Sorry, I simply don't have a ch 25 crystal.)

PayPal preferred, but I always accept money orders too.

Jon

[Jonathan Ott]

Pre Christmas sale!

$315 shipped. Comes with 2 NIP tail booms, one dented boom :oops:, 1 NIP T/R drive pulley (the front one), and new blades.

Other accessories are a small Plano box of extra parts, screws, balls, flybar shaft, 3 batteries (2ea 1800 mAh, one 2100mAh) decal sheet.

$425 gets you the heli and a JR X388S transmitter, alumuinum case, a handfull of extra miscellaneous used receivers, and atleast 3 new Tower Pro 9G servos...gotta check the bag, there might be four in there.

Onehellofadeal!

Jon

[Jonathan Ott]

okay, so the price stayed the same, but I added some extra goodies. :thumbup:

[Jonathan Ott]

I need to stay firm on this price...there are a lot of extras being thown in the box...I'm throwng in an e-flite pitch guage now too.

So, for $425 shipped, WoW!!! one Crack-a-lak'in deal!!!

Jon

[Jonathan Ott]

Quick note for full disclosure.

I did dump this bird after I origionally posted the ad. I was in a knee high hover and ESC went into voltage protection and surged on me. The MT went down, had a boom strike and shattered a blade, one blade grip and I think it tweaked the man shaft.

I replaced the blades, the grip, the main shaft. Straightend the boom and ordered a new set.

I re-programmed the ESC for middle voltage cut (it was set to high, I think the origional owner was flying on 4 cells, 'cause it ain't done it since)

Anyway, everything else is copesetic on the bird. I also ordered a new front T/R drive pulley as the teeth on the origional look well worn.

I bought it for $300+shipping (which was about $15) and now am wanting another 50cc IMAC plane, so the heli is going on the sale boards.

I want at least $300 + shipping for it, and will throw in all the extra stuff I bought for it.

So now for $315 (shipped) you will get:

Thunder Tiger Mini Titan e325 Helicopter
Align brushless motor (3550 Kv)
Align 35A speed controller
Telebee gyro
Tower pro 9g servos (4)
Some spare parts (feathering shafts (2), flybar shaft, misc. screws/links/balls, two NIP booms, one NIP T/R drive pulley)
New blades
Blade holder
partially used decal sheet
(2) 1800 mAh li-po's (one puffed by previous owner, black one in pic)
(1) Thunder Power 2100 mAh li-po
E-Flite pitch guage

I'd rather not part it out. Buy it and fly it.

Thanks for looking,

Jon

[Jonathan Ott]

$290 for option 1.

$375 for option 2. (With option 2, there will be no setup. I'll just ship it all to you that way you know you set it up the way you want it.)

And now for the best part of all:

FREE SHIPPING!
(within the lower 48 states)

[_ZeF]

PM sent

[teeson]

how much to ship to the greater vancouver area, british columbia, canada?
is it a half decent chopper to learn on?
would i be able to get justa cheap transmitter of you, so i can use it for a sim?

[Jonathan Ott]

Shipping to Canada will run less than $30 USD, insured.

USPS.com did not have specific destinations in Canada, their choice was "Canada" for packages, with 6-10 days shipping.

Jon

[Jonathan Ott]

how much to ship to the greater vancouver area, british columbia, canada?
is it a half decent chopper to learn on?
would i be able to get justa cheap transmitter of you, so i can use it for a sim?

Teeson,

ZeF has shown interest just ahead of you, but yes, I think the Mini Titan would be a good first heli. There is a lot of good info here on the 'Freak to read about concerning the MT. It is more stable than the T-Rex 450, from what I've heard, so that lends itself to being a better trainer as well as something you can grow with.

If ZeF gets the bird, the transmitter I have for sale is perfect for simulators and I have it at a great price considering it is an 8 channel computer tx (albiet an older model) that works great. CCPM is turned on in the transmitter so you can use it with all modern helicopters.

As a matter of fact, I ended up setting the MT up in the X388-S last night and flew a pack on it. Pitch and throttle curves are not set, yet (will do them tonight) but it flew fine with a full linear setup for me.

Jon

[_ZeF]

New PM sent

[Jonathan Ott]

Sold pending payment.

Once it is shipped, I'll close and lock this thread,

Thanks!

Jon

[Jonathan Ott]

Sold and shipped!

Jon