DX7 Pitch setup

[MoF65]

I have set up my throttle curves as I want them. And in Normal I have +/+13 degrees pitch as I have set on the model. When I switch to Idle1 the throttle curve is as expected but the pitch has +13 both with the stick in the bottom and at the top. What should I do to have the pitch curve work as normal

_______________
Morten Fagermoen

[TheBum]

Does the Idle1 pitch curve shown in the DX7 menus for the simulated heli's model look correct? I have my Normal mode pitch curve set to 40-45-50-75-100 and my Idle1 pitch curve set to 0-25-50-75-100 for both the real heli's model and the simulated heli's model and it works just fine in the sim.

[jrohland]

My first thought is you have pitch and trottle assigned to the same--or perhaps wrong--channels. Make sure your have the Collective Pitch and Throttle channels correctly assigned.

On mine, Throttle is assigned to 'controller channel 1'.

Collective Pitch is assigned to 'controller channel 6'.

jrohland

[MoF65]

Thank you for your answers! It was, as mentioned, wrong channel assignments.

________________
Morten Fagermoen