Which Parts to Sell

[dalepw]

Hi there all. Just recently purchase a DX7 and have no need for the servos, however as I am so new to RC Helicopters, I don't know which parts to sell. Please see the attached picture.

Obviously I need to sell the servos, the bag with the white servos horns.

Can someone please advise what the bag of screws and plastic bits would be for and what the cord with the switch on it is for?

Do I need to keep these or sell them?

Many thanks in advance

[bullaculla]

the switch is the bind switch and you have no need for it. You can bind just by plugging the bind plug directly into the RX batt slot. power will be taken from the throttle channel. but on that note, the mouting hardware and bind switch are not worth much, and would probably never sell on their own. you are better off just keeping it. The servos have been for sale everywhere tho. You can get about $50 for them. everybody sells them because they already have a bad rep for breaking off the output shaft. Some guys do use them in the trex 600. All you have to do is get the longer servo arm screw. They are a little slow, but fine for learning or sport/scale flying.