Stallion
11-04-2007, 10:55 AM
Hi people!
I got my shiny new DX7 yesterday and unpacked it right away. after struggling with the battery pack i finally got it charged. then the next problem appeared. I couldn't really bind the Tx to the Rx. I did like the instruction told me but the small (secondary) Rx would flash like the primary did. It only did slow flashes and not so bright ones. i flipped the manual and couldn't find any thing about this fault. so i tried again and again. Then finally it worked! i removed the bind plug and the switch harness. and it worked the whole evening. This morning i went out to the field and no connection between the Tx and the Rx. I thought it could be low battery. I recharged but nothing. So i tried to bind again. But i wont work this time. When i switch on the Rx both Rx should flash rapidly and very bright. but only the primary does that the secondary starts flashing then stops and continuing flashing but way slower and only minimum brightness.
Add on. I finally got it to bind again after i pulled the plug for a few minutes and let it rest. than i switched everything of and went out and ... Nothing. No Binding what so ever. No blinking flashing at all. Primary and secondary Rx doing nothing. So i started binding again. work the first time i tried. flew 7 min. Switched of the Rx and the Tx unpluged my Packs and tried to switch it back on again. Nothing.
Can it be that every time i will fly my Hurricane i have to Bind for a few minutes and then i can go fly?????????
I think i am switching back to my old Tx/Rx unit. Turn it on and every thing works!!!
Please help a fellow DX7 owner!!!!!
I am going nuts over this problem!!!
I got my shiny new DX7 yesterday and unpacked it right away. after struggling with the battery pack i finally got it charged. then the next problem appeared. I couldn't really bind the Tx to the Rx. I did like the instruction told me but the small (secondary) Rx would flash like the primary did. It only did slow flashes and not so bright ones. i flipped the manual and couldn't find any thing about this fault. so i tried again and again. Then finally it worked! i removed the bind plug and the switch harness. and it worked the whole evening. This morning i went out to the field and no connection between the Tx and the Rx. I thought it could be low battery. I recharged but nothing. So i tried to bind again. But i wont work this time. When i switch on the Rx both Rx should flash rapidly and very bright. but only the primary does that the secondary starts flashing then stops and continuing flashing but way slower and only minimum brightness.
Add on. I finally got it to bind again after i pulled the plug for a few minutes and let it rest. than i switched everything of and went out and ... Nothing. No Binding what so ever. No blinking flashing at all. Primary and secondary Rx doing nothing. So i started binding again. work the first time i tried. flew 7 min. Switched of the Rx and the Tx unpluged my Packs and tried to switch it back on again. Nothing.
Can it be that every time i will fly my Hurricane i have to Bind for a few minutes and then i can go fly?????????
I think i am switching back to my old Tx/Rx unit. Turn it on and every thing works!!!
Please help a fellow DX7 owner!!!!!
I am going nuts over this problem!!!