tail violent shake

[Helodad]

Tail Shake. It not hunting it only happen when I give a quick throttle response. Just flying around its fine it happens when I do a fast climb out and in a turn when I lower to enter its fine butt when I raise to get out it shake, it not the hole helo it just the tail I thought it was belt tension butt I loosened it and it still does it. I did change tail blade from the blue plastic that came with it to the MAH that came with it. It acting like it does not like quick torque response any hint on what to chick before I tear it a part? It's a violent shake and only on quick pit/throt inputs :arggg:

[Duracizer]

Could it be that you need to adjust your gyro?

[blakka_1]

I agree with the above post. Try turning the gain on your gyro down a little. Also what size tail blades are you running?. :)

[Helodad]

It's fixed, you all were right it was the gain. Never underestimate the old guy who puts around doing Only FAI stuff I ask him to take a look at my set up and found out that the gyro was not accepting gain in-put, I had the radio mix up. 10min later flip, roll ,Auto works like a champ? Thank Old FAI Guy(AKA T.G)

[Duracizer]

Glad you sorted it out.. :D

[RCfan]

He he, blame it on the old guy, huh? FWIW, any time you ask someone to take a look at your heli, pay close attention to anything they touch/change. Afterwards, go over everything before taking it out for a spin. You never know what you might find. :arggg:

[Helodad]

the other guy was the one who fixed it I am just glade I had someone to ask. I still would be trying to fix it. Sometimes you need a 2nd pair of eyes