dx7 end point

[im sparticus]

Hi guys can anyone tell me why or if its normal for...

on my dx7 in the page that shows all the channels and there travels exerything to the right of the screen will show right on 100% however when i move the sticks or switches so things move to the left of the screen they go beyond the 100% mark by "one dot" and to get them to line up with the 100% mark i have to limit the travel that coresponds to that side down 1 or 2%

I have tried calibrating the sticks but this does nothing and doesnt explain why it gets more travel to one side even with the switches.

boy i hope i made sence

[bullaculla]

It could be in your trims or subtrims. The monitor shows servo position, not stick position. If your curve or settings doesnt go to 100% or even over it, it will show on the monitor page.

[im sparticus]

nope all trims set to neutral and end points 100 (blank program) even does it on the gear and aux 1 switches i mean every channel goes over by 1-2% on the left or one dot on the screen,

[bullaculla]

That doesnt sound right to me either.
I wish I could check for you, but mx blanked out DX7 is all packed up and ready to ship. Hopefully someone else can help. Sorry man :(

[joehelicopter]

Hi guys can anyone tell me why or if its normal for...

on my dx7 in the page that shows all the channels and there travels exerything to the right of the screen will show right on 100% however when i move the sticks or switches so things move to the left of the screen they go beyond the 100% mark by "one dot" and to get them to line up with the 100% mark i have to limit the travel that coresponds to that side down 1 or 2%

I have tried calibrating the sticks but this does nothing and doesnt explain why it gets more travel to one side even with the switches.

boy i hope i made sence
Call the Spektrum Tech Support Guys....they'll fix you up in a couple of minutes:thumbup:

[im sparticus]

I think its just the way the display is and not the actual channel having more travel on the one side cause when i reverse the channel it still goes over on the left.