PDA

View Full Version : Trouble with the engine connectors.


Morten70
11-07-2007, 03:44 PM
Hi guys.

I just bought me a Hurricane 550, but i have one problem.
The 3 wires from the engine, is all black, end the shrinking tubes are red, can i find out in any way where they are supposed to go on the ESC?

Thanks :-)

Morten70

exceljay
11-07-2007, 04:01 PM
It don't matter. you can connect any where, if motor thuns reverse, just change two wire.

Hurriken
11-07-2007, 04:02 PM
There are no specific polarities on brushless motor wiring. Just hook up each black wire from the motor to each of the three colored wires on the controller, then test to make sure the motor is turning in the correct direction. If not: switch any two of the wires around and it will reverse the motor direction, and you'll be good to go!

Morten70
11-07-2007, 05:08 PM
Thanks alot, i thought that would be the thing.
Thanks again guys.

Morten 70