Lepton EX RTF with extras (Trade for like SE V2)

[Socal500]

Im not happy with the setup. Flight times are lower than I expected and I cannot pinpoint the problem. The packs supposedly had less than 10 flights so that should not be the problem. I have put 4 more flights each on them. Performs well just not what I expected. I want to go back to TRex SE V2 so Im want to trade local (SOCAL ONLY). Let me know what you have if your interested. We can hook up and check out each heli.

Here is a breakdown of items.

Hirobo Lepton EX RTF

Hitec HS85 MG (3 servos total)

MEDUSA 6V BEC

Align BL75 ESC

Hyperion HP-Z3035-10 Outrunner POWERHOUSE of a motor WITH FAN

RCP Carbon 425mm main blades (will be replaced with MAH)

68mm Carbon Tails from EVO Blades

MJP carbon 3D Tail Fin Set

2 Flight Power EVO 25C 3700mAh 4S 14.8 LiPo ( one without label 11 cycles) one with label 5 total cycles. 4 break in cycles and 1 flight)

1 Flight Power EVO 25C 3700mAh 5S lipo (would require motor change to use) Bought used with only 6 cycles. I have not used it because I cant so it still has just 6 cycles.

Futaba GY401 with 9254 tail servo (drop down regulator installed)

MJP 3D Carbon Fin Set (installed)

SPARE PARTS NEW IN PACKAGE:

MJP Carbon Stretched Crbon Tail Fin set

MJP Carbon Backer Frame Strength / Repair set

The following are all HIROBO OEM PARTS:

0304-019 SZM Stabilizer Bar (FLYBAR) ($8.99)

0304-042 LEX Tail Boom Brace ($6.99)

0304-064 LEX Rudder Control Set ($5.99)

0304-042 LEX Tail Boom Support Brace ( $8.99)

2504-029 Timing Belt (Tail Belt $18.99)

0304-048 LEX Tail Pitch Lever ($5.99)

0304-056 LEX SKID ( main sid set) $18.99

0304-012 SZM Feathering Shaft ($11.99)

0304-011 SZM Dampners ($4.99)

0304-018 SZM Stabilizer Control Arm Set ($37.99)

2529-014 Canopy Grommet Set ($3.65)

2524-016 M2 Rod End l=9: ($18.99)

0304-009 LEX Stabilizer Blade Set ($11.99)

0304-047 Tail Pitch Plate Set ( Tail pitch control lever set $14.99)

0304-024 LEX Main Pulley 56T ($5.99)

0304-064 LEX Rudder Control Rod Set ($5.99)

0304-043 LEX Tail Boom Pipe ($8.99)

0304-044 LEX Tail Shaft ($5.99)

0304-011 SZM Dumper Rubber ( $4.99 Rubber Dampners)

0304-0046 LEX Tail Housing ($5.99)

0304-050 LEX Tail Blade Holder ($6.99)

0304-014 SZM Pitch Arm ($8.99)\

0304-046 LEX Tail Housing ($5.99)

0304-012 SZM Feathering Shaft ($18.99)

[warrengrob]

Pics???

[Socal500]

Pics???

No pics. SInce this is a local deal anyone really interested will be able to check it out in person.

[Socal500]

Below for $500 plus shipping or will trade.

Lepton airframe (No Main Blades) (2 stock canopies. One painted orange to yellow fade with paint flaked off one spot. Other is stock with stickers applied.

Hyperion Z3025-10 with Fan (installed)

Align BL75 ESC (installed w/deans and wired to below BEC)

Medusa 6V BEC

MJP 3D Carbon Fin Set (installed / small crack on vert fin done on bench)

Plus these NIP Spare Parts

MJP Carbon Stretched Carbon Tail Fin set
MJP Carbon Backer Frame Strength / Repair set

The following are all HIROBO OEM PARTS: Over $250 in spare parts not including the above 2 MJP parts.

0304-019 SZM Stabilizer Bar (FLYBAR) ($8.99)
0304-042 LEX Tail Boom Brace ($6.99)
0304-064 LEX Rudder Control Set ($5.99)
0304-042 LEX Tail Boom Support Brace ( $8.99)
2504-029 Timing Belt (Tail Belt $18.99)
0304-048 LEX Tail Pitch Lever ($5.99)
0304-056 LEX SKID ( main sid set) $18.99
0304-012 SZM Feathering Shaft ($11.99)
0304-011 SZM Dampners ($4.99)
0304-018 SZM Stabilizer Control Arm Set ($37.99)
2529-014 Canopy Grommet Set ($3.65)
2524-016 M2 Rod End l=9: ($18.99)
0304-009 LEX Stabilizer Blade Set ($11.99)
0304-047 Tail Pitch Plate Set ( Tail pitch control lever set $14.99)
0304-024 LEX Main Pulley 56T ($5.99)
0304-064 LEX Rudder Control Rod Set ($5.99)
0304-043 LEX Tail Boom Pipe ($8.99)
0304-044 LEX Tail Shaft ($5.99)
0304-011 SZM Dumper Rubber ( $4.99 Rubber Dampners)
0304-0046 LEX Tail Housing ($5.99)
0304-050 LEX Tail Blade Holder ($6.99)
0304-014 SZM Pitch Arm ($8.99)
0304-046 LEX Tail Housing ($5.99)
0304-012 SZM Feathering Shaft ($18.99)

Will trade for.....

TRex SE V2 NIB

I would like to do this local but will deal non local but you will be responsible for shipping both ways and must provide excellent feedback, otherwise your trade must be shipped first.