E-Raven conversion w/ extra's

[j_kookboy]

I'm reluctantly selling my ERaven. One heli comes in, one must go out as we live in a small condo and I've got a significant other to compromise on space.
Here's the list :

Stock Century Raven - 299
Auto rotation upgrade - 50
CF tail set - 39
CNC servo arms - 22
CNC button - 10
Spare Speed up gear/shaft (small nick on one's of the teeth on the speedup gear so I'm including a new one and a shaft as well).

Hitec HS 605BB servos 35 x 3 105.00
Hitec Digi 5245MG (tail) 50.00
Fut GY401 - 129

Funkey 600 main blades - 60

Custom V-blades 600's - 100
- 60mm wide chord
- 174 grams
*Nice and wide/heavy for lifting/auto's

Full set of CF E-Conversion frame - 135 (mjpcarbon.com)
Spare set of lower side CF frames - 65 (mjpcarbon.com)
List of aluminum parts (custom CNC'd be gjestico) :
- Battery frame supports (upper/sides/lower)
- Lower frames/Battery frame alu connectors
- Lower frame set stiffener/brace
- Rear motor mount
- 4x frame/strut L mounts
- Swash guide plate
- 2x Servo V mount plates
- Gyro mount plate

Century CF frame set (spare) w/ alu mount - 85

*I used a Tango 45-08 on 10S for AP work so this machine was never pushed hard.

Parts are readily available from shops/Century.

The extra frames sets are there as spares 'in case', although this frame set with the aluminum braces is so darn strong I doubt lawndarting it would make a dent it it.

There's over $1,000 not including all of the custom CNC'd aluminum parts (add $$$)

I'm shipping the heli as shown in the pictures as one piece in a long box, double walled and full of packing peanuts. Shipping will be around 50-60 which I'll cover and I don't charge any 'extra' for paypal fees.

Selling for less than 1/2 the cost.

$650 Shipped USPS Priority with delivery confirmation.

Con US and Canada only.

Jesse

http://img442.imageshack.us/img442/3900/dsc0018customav6.jpg

http://img442.imageshack.us/img442/2919/dsc0017customnb7.jpg

http://img230.imageshack.us/img230/1351/dsc0016customso7.jpg

http://img230.imageshack.us/img230/50/dsc0014customeh5.jpg

http://img150.imageshack.us/img150/4005/dsc0012customlj8.jpg

http://img150.imageshack.us/img150/6609/dsc0010customjp7.jpg

http://img136.imageshack.us/img136/876/dsc0007customse7.jpg

http://img70.imageshack.us/img70/2852/dsc0006customng4.jpg

http://img411.imageshack.us/img411/4517/dsc0004customkx5.jpg

http://img70.imageshack.us/img70/7667/dsc0003customus3.jpg

http://img70.imageshack.us/img70/3383/dsc0001custommz8.jpg

[j_kookboy]

TTT

Price drop to $530 shipped.

Here's Greg's first conversion :

http://www.rcgroups.com/forums/showthread.php?t=266753

Mild 3D would be either a Tango 45-06 or Z-Power Z50A-600 on 6S or for balls out 3D 45-08 or Z-Power Z50A-800 on 10S.

Both are great motors and people use them in Trex600, Logo10/600 and Raven/Hawk conversions.


The wide Vblade 600's are really nice. They auto like you would not believe. Feels like a 90 ship when auto'ing.

I'll part out out the GY401 and the extra blades if anyone would like them.

GY401 - $100 shipped

Custom V-Blades 600/60mm chord - $90 shipped

Jesse

[j_kookboy]

V-Blades sold to P-38J-Lightning.

Parting out the rest.

GY401 - $100 shipped

Heli with cyclic Hitec HS 605BB servos, all spare parts and Funkey 600's is $350 shipped.

Jesse

[j_kookboy]

401 sold and the Hitec Digi 5245MG.

What's left :

Heli with cyclic (3) Hitec HS 605BB servos, all spare parts and Funkey 600's is $350 shipped.

[j_kookboy]

Surprised it's not gone yet at the price of a basic Raven kit.

Up on ebay in the next few days.

If anyone would prefer, I can remove all the CF/aluminum conversion parts, spare frame sets, servo's and sell the standard $300 kit for $250 shipped.

Jesse

[j_kookboy]

I can't sell it for $300.

Keeping it and stretching it to 710's.

Thanks for the interest guys. :)

Jesse