View Full Version : using futaba 6exh with g2.5
istandalone
11-18-2007, 10:34 AM
can someone explain how i can get my tx to work with the g2.5 sim? i've got the cable that goes from the sim tx to mine, but no matter what i do i can't get it to work. also, i don't have the manual/instructions as i got this sim with two expansion packs for free, from a friend, and he never tried to use his tx. any help is appreciated.
istandalone
11-21-2007, 03:56 PM
bump, anyone? anyone know of a site that maybe has the instructions for it?
trexflyer02
11-21-2007, 04:01 PM
There have been MANY threads and posts about this subject ... there is even a step-by-step guide in the instruction manual. Search here or over on the Knife Edge Forums. (http://www.knifeedge.com/forums/index.php?)
istandalone
11-21-2007, 05:38 PM
that's the problem. no manual. and my search came up with nothing. as you know, if you don't word it correctly you'll come up blank. if there are so many threads, got a link, instead of giving me a smartass answer to a question you obviously didn't read all of?
trexflyer02
11-21-2007, 08:19 PM
Well, considering the manual is contained IN RealFlight (not paper) I don't see how you couldn't have it.
Just a tip ... RF was made to be used with it's InterLink controller, and most real life radios you use with it will have some sort of problems. I have tried it with the 6EX and some of the switches/channels don't work. Plus ... the InterLink is very close in feel to the 6EX, since it's also a Futaba-designed radio.
Look in the manual...
istandalone
11-22-2007, 10:14 AM
ok, i didn't know that. and without packaging for the interlink and the disks i'd have no way to figure that out. sorry about my attitude last night, my gf had just broken my favorite glass.....and well, that sucks. so the manual is contained in the program. sweet.