Pinecone
11-18-2007, 11:28 AM
I have a Gaui EP-100 Pro/SE for sale. This is the version with CNC head and the Carbon Fiber Frame.
It is complete and properly setup. I have been flown a few times, had one blade strike that bent the main shaft, which has been replaced. The mast has been reinforced with a bit of epoxy (known problem).
I just find myself moving towards larger helis.
This is an amazing, very small heli that is fully CCPM.
I am offering it 3 different ways:
Option 1:
Complete EP-100 Pro/SE with 2 spare sets of main blades, already balanced, and the original box/carrying case.
http://www.aeromicro.com/GH100SE.htm
$150 shipped.
Option 2:
Heli as above, plus Gaui Tornado Micro Brushless motor and Castle Phoenix 10 ESC. The Motor is installed with a 15 tooth pinion (2S setup) and the Motor and ESC leads have been shortened and soldered together to save weight.
Motor: http://www.aeromicro.com/Catalog/ga...ion_5379891.htm
$200 shipped
Option 3:
Heli complete with the motor and ESC, and all electronics. The heli is setup with 3 x Hitec HS-55 cyclic servos, 1 x Hitec HS-50 tail servo, Telebee Heading Hold Gyro, and Berg 7 Rx with micro antenna installed.
$325 shipped
It is complete and properly setup. I have been flown a few times, had one blade strike that bent the main shaft, which has been replaced. The mast has been reinforced with a bit of epoxy (known problem).
I just find myself moving towards larger helis.
This is an amazing, very small heli that is fully CCPM.
I am offering it 3 different ways:
Option 1:
Complete EP-100 Pro/SE with 2 spare sets of main blades, already balanced, and the original box/carrying case.
http://www.aeromicro.com/GH100SE.htm
$150 shipped.
Option 2:
Heli as above, plus Gaui Tornado Micro Brushless motor and Castle Phoenix 10 ESC. The Motor is installed with a 15 tooth pinion (2S setup) and the Motor and ESC leads have been shortened and soldered together to save weight.
Motor: http://www.aeromicro.com/Catalog/ga...ion_5379891.htm
$200 shipped
Option 3:
Heli complete with the motor and ESC, and all electronics. The heli is setup with 3 x Hitec HS-55 cyclic servos, 1 x Hitec HS-50 tail servo, Telebee Heading Hold Gyro, and Berg 7 Rx with micro antenna installed.
$325 shipped