using w/out a 3in1

[sevacko]

has anyone set up a blade cp or cp pro w/out a 3in1 just used a heli rx and a brushless main and stock how do you wire in the stock tail to the gyro

[carlo_the_wonder_frog]

You have to have a seperate ESC for the tail, the ESC throttle is controlled by the gyro.

[eddo22]

this article might help you: http://www.helihobby.com/html/separate_electronics.html

[rabidguineapig]

If you don't have a tx with throttle Hold make sure you get a tail esc that arms the same way as the brushless main or you won't be able to start up your heli