Mini Titan tail servo Recommendations

[philo]

Hi all
im currently building my mini and im looking for Recommendations on a digital tail servo to work with the gy401? i have bought a s3154 but i think this would be better suited to a smaller model. i am looking a a robbe futaba fs 61 bb speed digital servo designed for the trex but im not sure. can anyone help me out here???

thanks a million

[EricW]

Heard some bad reports about overheating when you set the gyro to digital, so don't use the digital setting on the GY401.
I use the S3153 (with digital setting) and it flies perfect during sport-flying, once I'm going for some 3D flying (I'm still learning :) ) I'll know if it's strong enough for that.
If you plan to do some 3d and fast backward figures and want to be sure it holds, i would recommend a stronger servo like a S9650.
I also used the bb speed when i started in January, the S3153 is much better IMO.

Eric

[uragano47812]

i have tried the s9257 with CSM 720 but the beest servo is s9650, it is much stronger.

[flybarless]

JR DS3400G, best tail servo I have used so far on a Mini Titan/Trex 450

[henrik04]

Flying happily with a Futaba S9650 and GY401, Seriously thinking of using the DS3400G though..

[Libelle]

Have the same problem, what servo for the tail?
I am flying the CC35 with 4,8V BEC schould I go with the S9650 or the S9257???

Thanks
Libelle

[ecofan_]

Hi

Go for a 9257, it works really well on 4.8V.
Mine worked perfectly with a gy401, but I had a few problems with the CSM 720. They were solved by using another hole on the servo horn !

Bye

[philo]

guys thanks for all your suggestion im leaning towards the 9257 as my CC esc is runnning at 4.8v any final thoughts??

[flag8r77]

Go with the 401 and 9650...great combo, check out Rick's for the lowest price online. I think both together came to $180.